|Bolt Range||M 50 x 1.5 - Tr 1000 x 8|
|Temperature||Up To 538 Centigrade|
The HYTORC NUT is the highest level of bolting optimization. It provides all the benifits of the HYTORC Washer for applications where there is little or no side clearance.
Hytorc Nut has the inner sleeve connected to the bolt end and is held stationary by the HYTORC machine during operation.
The outer sleeve which turns on the washer face is connected to the inner sleeve by an acme thread (ASME/ANSI B1.5) providing a higher turning friction to the inner sleeve and washer than the outer sleeve.
When the action force of the HYTORC machine is applied to the outer sleeve and its opposite reaction force to the inner sleeve, the outer sleeve turns at a known coefficient of friction on precision machined surfaces.
This results in the inner sleeve (and the bolt) rising in a torsion-free, pure axial motion applying pre-calibrated tension to the bolt.
The hardened washer remains stationary during the entire operation eliminating facial galling. Pure, mechanical bolt tension is provided hands-free (even on inverted applications) without the use of bridges, pullers or jack screws and without relying on bolt relaxation to seat the nut!
The HYTORC NUT™ is rated for temperatures up to 1,000°F (537°C). The HYTORC NUT™ is available for any bolt size (imperial/metric), any thread configuration and upon request, is available in specialty materials to suite the application and environmental conditions
Install The HYTORC NUT™, set the pump pressure, place the tool and simply push a button on the remote control to achieve unprecedented bolt load accuracy to + 5%... guaranteed!
The HYTORC NUT™ is a perfect solution for limited radius applications.
Applications set into a pocket or a counter bore situation pose a problem with conventional tooling. Standard drive extensions and machined down compromising the safety of the operator!
The design and the mechanics of the Clamp allow positioning the HYTORC machine away from the conflict area!
Calibrated Bolt Load Accuracy
The HYTORC Nut is the only bolting system to provide repeatable accuracy, even bolt load that eliminates joint failure and unintentional nut loosening.
Conventional bolting systems include a reaction arm and square drive on the opposite sides of the tool causing high stress in the body of the tool, which can lead to failure over time. The HYTORC Nut eliminates most of the internal stress and increase the lifetime of your tools by putting the action and reaction on the square drive axis.
The patented technology is the only fastener to guarantee the elimination of galled or damaged threads on installation and removal. These fasteners are robust and can be installed on various high temperature applications for ten years and longer. These nuts can be removed without damage to the bolts, providing tremendous savings by eliminating the need for bolt replacement.
The displayed pricing is for illustrative purposes only; actual costs may vary based on specific application requirements.